Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Parts & Welding for Duncanville Homeowners
When a gate hinge snaps or a weld cracks on a Duncanville property, the gate stops being a gate. It becomes a heavy, awkward piece of metal that scrapes the driveway, refuses to latch, and leaves your yard open to whatever wanders in. Gate Parts & Welding in Duncanville is the craft of putting that metal back together correctly, whether it’s a new set of hinges, a rebuilt post, or a fresh weld on a cracked rail. Ironworks Gate Co. has done this work in Duncanville for over 42 years, since 1984, and our founder Victor Salinas still holds every job to the same standard he set on day one: done right, every time, and backed in writing. Call (903) 532-2236 and a live person answers, day or night.
What Our Gate Parts & Welding Service Includes
Not every gate problem calls for a full replacement. Most of the time, the issue is one failed part or one fatigued weld, and fixing that single point of failure is the right repair. Here’s what we handle under our Best Gate Parts & Welding in Duncanville, TX service, and how we approach each piece of it.
Hinge Replacement
Hinges carry the entire weight of the gate every time it opens and closes, and in Duncanville’s clay-heavy soil, gates settle and shift, which puts uneven load on the hinge barrels. You’ll hear a squeal or a grinding sound, or see the gate begin to drag on the latch side. We remove the old hinges, check the post and the gate frame for damage, then weld or bolt in new hinges that match the gate’s weight and swing. On heavy iron gates, we often step up to a heavier-duty hinge than what was originally installed, because the original was undersized from day one.
Post Replacement
A gate post that leans or shifts at the base means the foundation under it has begun to fail, or the post itself has rusted through at ground level. In Duncanville, where summer heat bakes the soil and winter rains swell it, posts work loose over time no matter how well they were set. We dig out the old post, inspect the concrete footing, and set a new post in fresh concrete with proper depth and bracing. We also check the gate’s swing clearance so the new post doesn’t just repeat the old problem six months later.
Rail Repair
Rails are the horizontal members that give a gate its structure, and they crack most often at the weld joints or where a vehicle has bumped the gate over the years. A cracked rail lets the gate rack and twist, which then overloads the hinges and the latch. We grind out the old weld, straighten the rail, and lay in a fresh weld that is actually stronger than the original joint. If the rail is too far gone, we cut out the bad section and weld in a new piece of matching steel.
Custom Welding
Some repairs don’t fit a catalog. A custom gate that was built forty years ago by a welder who is no longer around, or a gate with ornamental scrollwork that has cracked in three places, needs a welder who can match the existing work, not just patch it. Our team welds steel, iron, and aluminum, and we reproduce the look of the original fabrication so the repair disappears into the gate. Victor Salinas has overseen custom welding work on Duncanville gates since the 1980s, and the fixes we make are the kind that hold for decades.
Gate Rollers
Sliding gates run on rollers, and those rollers wear out. You’ll feel the gate get harder to push or hear it rumble when the motor runs, which usually means the roller bearings have failed or the wheels have flat-spotted. We replace rollers with the correct size and weight rating for your gate, then adjust the track and guide brackets so the gate rolls true. A set of new rollers on a properly adjusted track can make a twenty-year-old sliding gate move like it was just installed.
Latch & Lock
A gate that won’t latch is a gate that won’t stay closed, and a latch that binds is one that will eventually break. We repair and replace mechanical latches, magnetic locks, and keyed hardware, and we make sure the latch strike lines up correctly with the post, because misalignment is what kills most latches. When we’re done, the gate latches with a solid click, not a fight.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Parts & Welding
We carry repair parts and hardware for the major gate brands you’re likely to have on a Duncanville driveway, and we’ve been working on these names since long before most of today’s gate companies existed. LiftMaster hinges, brackets, and rail hardware are items we keep on the truck, because we know a LiftMaster gate system depends as much on its mechanical parts as it does on the operator. We also stock FAAC and BFT replacement components, and our welders are familiar with the frame designs those brands use, which matters when a repair has to fit into a bracket that was engineered to tight tolerances.
Linear is another brand we service regularly, and we know its sliding and swing gate hardware well enough to diagnose a parts failure quickly. Whether your gate is a LiftMaster, FAAC, BFT, Linear, or another make entirely, we can source the right part or fabricate the right weld to get it working. The goal is the correct fix on the first visit, not a guess that leaves you waiting on a second trip.
Signs You Need Gate Parts & Welding Right Now
- The gate drags on the ground or scrapes the driveway. This means a hinge has worn, a post has settled, or a weld has cracked and the gate is no longer sitting square. The longer it drags, the more damage it does to itself and to the concrete.
- You can see a crack in the metal, especially at a weld joint. Cracks only grow. A small crack at a rail joint today becomes a snapped rail in a season, and that can mean a gate that falls rather than swings.
- The gate sags noticeably on the latch end. Sagging is almost always a hinge or post problem. Forcing the latch to engage a sagging gate wears out the latch and the hinges together.
- The gate makes a grinding or screeching sound when it moves. That noise is metal on metal with no lubrication or a bearing that has failed. Running it longer turns a simple parts replacement into a bigger repair.
- The gate has been hit by a vehicle or a heavy object. Impact damage often bends rails and cracks welds even when the damage isn’t obvious at a glance. A gate that has been struck should be checked, even if it still opens and closes.
Our Gate Parts & Welding Process - Step by Step
- 1
We answer the phone and listen. When you call (903) 532-2236, a live person picks up, not a voicemail tree. We ask what the gate is doing, what kind of gate it is, and when the problem started. That first conversation usually tells us which parts are likely involved and what to bring on the truck.
- 2
We assess the gate on site. A technician comes to your Duncanville property, examines the gate, the posts, the hinges, the welds, and the surrounding concrete. We measure, we check the alignment, and we look at how the gate has worn over time, because that wear tells us what failed first and why.
- 3
We give you a written price before any work begins. You’ll know the exact cost before we touch a single bolt. No surprises on the bill, ever. If the repair is bigger than expected, we stop and discuss it with you before proceeding.
- 4
We do the work the same visit. Most parts and welding repairs are completed in a single visit. We carry common hardware on the truck and we weld on site, so you’re not waiting days for a gate that won’t close.
- 5
We test it and stand behind it. Before we leave, we cycle the gate several times, check the latch, check the swing, and make sure everything moves the way it should. Then we back the work with our written 90-Day Done Right Promise. If it’s not right, we come back and make it right. No paperwork, no arguing.
How Much Does Gate Parts & Welding Cost in Duncanville?
A hinge replacement in Duncanville typically runs $150 to $450 per hinge depending on the gate’s weight and whether the new hinge needs to be welded or bolted. Post replacement is the bigger job: expect $400 to $1,200 per post when you factor in excavation, concrete, and re-hanging the gate. Rail repair and custom welding usually fall between $200 and $800 depending on how much metal needs to be cut out and how much new steel goes in. Gate rollers run $100 to $350 for parts and labor, and latch and lock repair is generally $100 to $300. These are honest ranges for this market, not national averages.
What moves the price is the gate’s weight, the condition of the posts, and whether the repair is a simple part swap or a fabrication job. Heavier gates require heavier hardware, and heavier hardware costs more. The best way to avoid overpaying is to fix the problem when it’s small, before a bad hinge turns into a broken post. Every estimate we give is free, and every price is agreed in writing before the work starts.
Gate Parts & Welding Near Duncanville - Our Service Area
Ironworks Gate Co. serves Duncanville and the surrounding communities: Cedar Hill, DeSoto, Glenn Heights, Lancaster, Ovilla, Wilmer, Oak Cliff, Oak Leaf, Red Oak, and Arlington. If your gate is in any of these areas, we’ll be there when we say. You can learn more about our work in neighboring cities on our Gate Parts & Welding in Grand Prairie and Gate Parts & Welding in Cedar Hill pages.
Serving Duncanville, TX - Our Local Coverage Area
We’re based in the Duncanville area and know this community well, and we also provide Gate Parts & Welding in DeSoto. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Parts & Welding in Duncanville
Gate parts and welding is the repair service that fixes the structural and mechanical pieces of a driveway or estate gate: hinges, posts, rails, rollers, latches, and the welds that hold them together. It covers everything from swapping a worn latch to cutting out and re-welding a cracked steel rail. Unlike a full gate replacement, it focuses on restoring the existing gate by replacing or repairing only what has failed.
Most hinge, roller, latch, and weld repairs are completed in a single visit of one to three hours, depending on the work. Post replacement takes longer because the concrete has to be excavated and the new post has to be set and allowed to cure before the gate is re-hung. We will give you a time estimate when we assess the gate, and we stick to it.
In Duncanville, expect $150 to $450 per hinge, $400 to $1,200 for a post replacement, $200 to $800 for rail repair or custom welding, and $100 to $350 for rollers, with latches running $100 to $300. The gate’s weight, the condition of the surrounding structure, and whether the fix is a parts swap or a fabrication job determine the final number. Call (903) 532-2236 for an exact quote, estimates are free.
Yes, we stock repair parts and hardware for LiftMaster and FAAC gates, and our technicians have years of hands-on experience with both brands’ mechanical systems. We don’t just know the part numbers; we know how these gates wear and where they fail. If your gate is a different brand, we can source that hardware too.
Yes. A live person answers the phone 24 hours a day, seven days a week, and we offer Emergency Gate Parts & Welding in Duncanville, TX for situations where a gate won’t close or won’t open and security is compromised. Call (903) 532-2236 and tell us what’s happening. We’ll get a technician to you as quickly as possible.
Every job is covered by our written 90-Day Done Right Promise. If the repair we made isn’t right, we come back and make it right at no charge. No paperwork, no arguing, no exceptions. That applies to parts and welding work alike.
Clear a path to the gate and make sure we have room to work on both sides. If there are vehicles in the driveway, move them so we can swing or slide the gate without obstruction. That’s all we need. We’ll handle the rest, from the assessment to the welded repair to the cleanup when we leave.
Schedule Your Gate Parts & Welding Service in Duncanville Today
If your gate is dragging, sagging, cracked, or making noise, don’t wait for the next thing to break. Call (903) 532-2236 now for a free, no-obligation estimate. A live person answers 24 hours a day, seven days a week, and every price is agreed in writing before the work begins. We’ll be there when we say, and the repair will be done right and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Duncanville since 1984.