Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Installation for Duncanville Homeowners
A new driveway gate in Duncanville typically costs between $2,400 and $7,800 installed, depending on the gate material, width, and whether you’re adding an opener. Most installations take two to four weeks from the initial measure to the finished, working gate. We’ve been building and hanging gates since 1984, and we quote a fixed price before the first piece of steel is cut - that’s why we’re known for the Best Gate Installation in Duncanville, TX.
If the gate at the front of your property is sagging, dragging, or simply not there at all, call us at (903) 532-2236. Victor Salinas and the Ironworks Gate Co. team handle the full installation, from the first weld to the final keypad code. We’re based right here in the Dallas County area and we answer our own phone 24 hours a day. No voicemail trees. You get a straight answer and a written price, and you never pay a dime until we’ve agreed on the number.
We serve Duncanville homeowners who want a gate that opens and closes without fuss for decades. That means setting posts in concrete below the frost line, sizing hinges for the actual weight of the leaf, and wiring automation so the motor never fights the gate. We handle every part of the job ourselves. That is the only way the Gate Installation in Duncanville warranty means anything.
What Our Gate Installation Service Includes
Every installation starts with a free on-site measure and a written quote. We don’t estimate over the phone, because the slope of your driveway, the condition of the soil, and the distance to your electrical panel all change the price. What follows is what we actually do on each type of gate.
Driveway Gate
A driveway gate is the large gate across your vehicle entrance, and it’s the one that takes the most abuse: wind, rain, sun, and a motor pulling against it every single day. We build driveway gates from steel, aluminum, or iron, sized exactly to your opening rather than forcing a stock panel into a space it doesn’t fit. Post depth and concrete footing size are calculated for the gate’s full weight and the clay soil common around Duncanville, which shifts more than you’d think.
Pedestrian Gate
A pedestrian gate is the smaller, walk-through gate beside the driveway or leading into a side yard, and it gets opened and closed more often than any other gate on the property. We hang pedestrian gates on adjustable hinges so the leaf can be tuned as it settles, and we set the latch at a height that actually works for the people using it. A pedestrian gate should close firmly on its own without slamming, and that comes down to hinge placement and proper weight distribution rather than luck.
Sliding Gate
A sliding gate rides on a track and is the right choice for long driveways, uphill entrances, or homes where a swinging gate would block the street or sidewalk. We pour the concrete track bed level and set the V-track or cantilever rollers with a laser, because a half-inch of slope makes the motor work twice as hard. Sliding gates also need a receiver post, a chain or rack drive, and end stops, and we build all of that as part of the installation rather than as an add-on surprise.
Swing Gate
A swing gate pivots on hinges set into the gate posts, and it’s the most common style we install in Duncanville neighborhoods. The key to a swing gate that doesn’t sag after five years is hinge sizing: a heavy iron leaf on light residential hinges will always drop. We match the hinge barrel and post thickness to the actual weight of the leaf, and we reinforce the corners of the gate frame so they don’t rack out of square.
Double Gate
A double gate is a pair of leaves that meet in the middle, and it’s the classic Texas ranch or estate entrance. The challenge is keeping both leaves level and latching when the ground underneath them moves, which it does. We set both posts in the same concrete pour when possible, and we mount the center latch and drop rod so the gate can be pinned open or closed without any hardware dragging through the dirt.
Security Gate
A security gate is built to keep vehicles out, not just to mark the property line, and it typically includes a taller frame, welded steel pickets, and an access control system. We build the gate to the height and material you actually need for the level of security you want, and we pair it with the appropriate opener and keypad or intercom. A security gate that is easy to climb over or push open is decoration, so we’re honest with Duncanville homeowners about what a gate can and cannot do.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Installation
We install and wire openers from LiftMaster every week. Their residential and commercial swing and slide operators have been on more Duncanville driveways than we can count, and we keep their common control boards and remotes on the truck so an installation doesn’t stall waiting for a part.
FAAC makes hydraulic and electromechanical operators that power a lot of estate gates across Texas. We’ve been installing and servicing FAAC since the 1990s, and we know their pump units and control boards well enough to set limits that don’t strain the motor or the gate.
We also work extensively with BFT and Linear operators. BFT’s 24-volt systems are common on solar installations where running power to the gate is difficult, and Linear is a straightforward residential workhorse. If your gate has a different brand on it, we can still help. The installation and the opener are two separate jobs, and we’re trained on both.
Signs You Need Gate Installation Right Now
- Your current gate drags across the driveway. A gate that scrapes or catches on the ground is telling you the hinges or the posts have moved. On a wood gate it might mean rot at the hinge mounts. On a metal gate it usually means the posts were set too shallow or the hinges were undersized from the start.
- The gate has been patched and welded more than once. Welding a crack buys time, but repeated fractures mean the metal is fatigued or the frame was underbuilt for the gate’s weight. Another patch on a stretched frame will fail the same way, and usually sooner than the last one.
- The posts lean inward or the gate no longer latches. Posts that move are almost always a footing problem. The fix is not a bigger latch. It’s digging out the old post, pouring a proper footing, and re-hanging the gate so it sits square again.
- Your opener struggles or grinds but the gate itself is fine. If the operator was installed before the gate or is undersized for the leaf weight, it will burn through gears and boards no matter how often you repair it. Installing a correctly sized opener, or repositioning the mounting point, often solves the problem permanently.
- You have no gate but need one for privacy, pets, or security. The truth is simple: a well-built gate and a working opener stop most unwanted visitors before they ever get out of the car. Many Duncanville homeowners call us after an incident, and we’d rather help before one. A gate is cheap insurance compared to what it protects.
Our Gate Installation Process - Step by Step
- 1
Free on-site measure and written quote. We come out, walk the site, measure the opening, check the ground slope, and look at where the power will come from. You get a written price with a breakdown: gate, posts, hardware, opener, labor. That price is agreed before any work starts.
- 2
Gate design and material selection. We show you options based on how the gate will actually be used. A double steel gate on a limestone drive needs different hardware than a single aluminum gate on a flat slab. We’re not going to upsell you into a gate you don’t need.
- 3
Post setting and footing work. We dig the post holes to the depth the gate weight requires, set the posts in concrete, and brace them so they cure square and plumb. We don’t rush this step, because everything else hangs on it. If your soil is soft clay, we go deeper.
- 4
Gate fabrication and hanging. The gate is built to your opening, welded and reinforced at stress points, and hung on hardware sized for its true weight. We set the reveal, tune the hinges, and adjust the latch before the motor is ever wired.
- 5
Opener installation, programming, and walkthrough. We mount the operator, set the limits, wire the safety edges and photocells, and program every remote and keypad. Then we walk the gate with you, show you how to operate it manually in a power outage, and explain the 90-Day Done Right Promise in plain language.
How Much Does Gate Installation Cost in Duncanville?
A single steel driveway gate with a basic opener in Duncanville usually lands between $3,200 and $5,500. A double iron estate gate with an automation package runs $6,000 to $9,800 or more. Pedestrian gates alone start around $900 to $1,600 installed. These are honest ranges based on the jobs we’ve done, not bait numbers.
What drives the price: the gate’s width and height, the material (aluminum is lighter but often pricier than steel), whether it’s a single or double gate, the opener type, and how far the gate is from your electrical panel. A long power run through a Duncanville backyard costs more than a panel right next to the gate post. Access control like keypads, intercoms, and vehicle loop detectors adds to the total but is worth every dollar if you actually want to keep people out.
The best way to avoid overpaying is to get a written quote that separates the gate, the hardware, and the automation. If a contractor gives you one lump sum with no breakdown, walk away. Our estimates are free, and the number we write on the page is the number you pay. No surprises. Ever.
Gate Installation Near Duncanville - Our Service Area
We install gates throughout Duncanville and the surrounding communities, including DeSoto, Cedar Hill, Glenn Heights, Lancaster, Ovilla, Wilmer, Oak Cliff, Oak Leaf, Red Oak, and Arlington. Most Duncanville jobs are scheduled within one to two weeks of the quote, and we handle every installation with the same written 90-Day Done Right Promise. If you’re comparing quotes or already have a written estimate from another company, bring it to us. We offer a Free Second Opinion on Any Written Estimate, no strings. For more on our neighboring service areas, see home for the full list, or visit Gate Installation in Grand Prairie and Gate Installation in Cedar Hill.
Serving Duncanville, TX - Our Local Coverage Area
We’re based in the Duncanville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Installation in Duncanville
Gate installation is the complete process of designing, hanging, and automating a gate on your property. It includes measuring the opening, setting the posts in concrete, building or sourcing the gate leaf, installing the hinges and latch, wiring an opener if you want one, and testing every component. In Duncanville, we do the entire job with our own crew, so no part of our Gate Installation - Duncanville service is subcontracted.
Most single gate installations are finished in one day on site, once the gate is fabricated. The full timeline from the free measure to the completed job is typically two to four weeks, depending on material availability and city permitting requirements. We’ll give you a firm schedule when we quote, and we’ll be there when we say.
A typical single driveway gate with an opener in Duncanville runs $3,200 to $5,500. Simpler pedestrian gates start around $900, and large double iron gates with full automation run $6,000 to $9,800 or more. Call (903) 532-2236 for a free on-site quote. We write the number down before any work starts, and that’s the number on the bill.
Yes. We install, program, and service LiftMaster swing and slide operators across Duncanville. We keep common LiftMaster control boards, remotes, and safety edge components on hand, so we can complete most installations without waiting for parts. If your opener is BFT, FAAC, or Linear, we’re trained on those too.
If your gate is stuck open, stuck closed, or your opener has failed and you need access secured, call us for Emergency Gate Installation in Duncanville, TX at (903) 532-2236. A live person answers 24 hours a day, and we’ll tell you over the phone whether we can send a technician immediately or schedule you for the next available slot. We take security failures seriously, and we respond accordingly.
Every gate installation from Ironworks Gate Co. is covered by our written 90-Day Done Right Promise. If something isn’t right within 90 days of completion, we come back and fix it. No paperwork, no arguing, no exceptions. We also honor manufacturer warranties on openers and hardware, and we’ll show you the details in writing when we quote.
Clear the area around the gate opening: move vehicles, trash bins, and any lawn equipment at least ten feet from the work zone. Mark any underground irrigation or invisible pet fence lines near the posts. If you have a preferred keypad code, write it down so we can program it during the install. We’ll handle everything else.
Schedule Your Gate Installation Service in Duncanville Today
You’ll know the price before we start, and you’ll have it in writing. Call (903) 532-2236 for a free estimate or a second opinion on any written quote. Victor Salinas will be glad to walk your property with you and show you exactly what we’d do.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Duncanville since 1984.