Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Arlington
Gate installation in Arlington, TX starts with the ground under your posts, not the gate itself. A new driveway gate, swing gate, or sliding gate on Arlington’s Blackland Prairie clay runs anywhere from $2,400 to $8,500 installed, depending on the operator, materials, and whether the footings need to go deeper than standard. We serve all three Arlington ZIP codes: 76001, 76002, and 76003. If your current gate is leaning, binding, or just tired after twenty or thirty years, call (903) 532-2236 and we’ll give you a straight answer and a written price before any work starts.
We’ve been installing and replacing gates on Arlington’s clay for years, and we know this soil. Standard-depth footings fail here. You need deeper footings, helical anchors, or both, or you’ll be resetting the same post in eighteen months. That’s not an upsell. That’s the difference between paying once and paying twice.
Why Ironworks Gate Co. Is Arlington’s Preferred Gate Installation Company
Victor Salinas runs Ironworks Gate Co. with a simple rule: the 400th job gets the same care as the first. Homeowners in Arlington call us because they’ve already been through the cycle with another contractor. The gate sagged, the post leaned, the operator failed, and the guy who installed it never came back. That doesn’t happen with us. Every gate we hang in Arlington is backed by our written 90-Day Done Right Promise. If something’s not right, we come back and make it right. No paperwork. No arguing. Done.
Arlington is a city with thousands of homes built between the mid-1970s and the mid-2000s. In south Arlington especially, the late-1990s HOA communities in 76001, 76002, and 76003 are full of ornamental iron driveway gates and automated community entrances that are now twenty to thirty years old. Original control boards are failing. Posts set in shallow concrete have shifted. Cedar privacy gates have warped through a hundred summers. We know what those gates looked like when they were hung, and we know what they need now. We’re also trained and equipped on nine automation brands, including LiftMaster, DoorKing, and Elite, so when we install your new gate, the operator and the metal work together like they were designed to.
We’re not a handyman service. Gate work is what we do, full stop. Ironworks Gate Co. has been doing this work for over 42 years, founded in 1984, and we plan to be in Arlington for another forty. A live person answers our phone 24 hours a day, 7 days a week, and our background-checked, uniformed technicians work in your driveway the way they would work in their own mother’s.
Key Takeaways
- Gate installation in Arlington runs $2,400-$8,500 depending on size, material, and operator.
- Blackland Prairie clay demands deeper footings and often helical anchors. This is standard here, not an add-on.
- We install and service operators from LiftMaster, DoorKing, Elite, Mighty Mule, and more.
- Every gate is covered by our written 90-Day Done Right Promise.
- Free estimates. Upfront pricing. Call (903) 532-2236.
Our Gate Installation Services in Arlington
We install every type of residential gate Arlington homeowners actually use. Here’s what that means, gate by gate.
Driveway Gate
A driveway gate in Arlington is more than curb appeal. It’s the first line of security for a home, and it takes a beating from the North Texas sun. We install steel and ornamental iron driveway gates with operators matched to the gate’s weight and swing path. On a clay lot in south Arlington, we set posts in footings deep enough to survive the dry-summer heave cycle. If you’re in an HOA community in 76002 with a shared entrance, we also install the slide-gate operators and loop detectors those setups require.
Pedestrian Gate
A pedestrian gate gets used more times per day than any gate on the property. The hinges wear, the latch drifts, and the post the gate hangs from starts moving with the soil. In Arlington, we see pedestrian gates in 76001 and 76003 neighborhoods where a cedar post has fractured from years of leaning and re-leaning. We replace those with steel posts set in proper footings, hang the gate square, and install hardware that will still close quietly a decade from now.
Sliding Gate
Sliding gates are the go-to for Arlington driveways that slope or have limited swing clearance. But a sliding gate on shifting clay is unforgiving. If the hinge post moves even an inch, the rack and pinion wears unevenly, the gate starts grinding, and eventually the operator burns out. When we install a sliding gate anywhere in Arlington, we account for the soil movement before the first bolt goes in. That’s the difference between a gate that tracks straight for fifteen years and one that starts fighting itself within two.
Swing Gate
Swing gates are the single most common gate type we replace in Arlington’s older subdivisions. Double swing gates in particular, especially the ornamental iron driveway gates hung during original buildout in the 1980s and 1990s, have reached the end of their hinge and post life. Warped cedar planks from 100°F heat add load to worn hinge posts until the post cracks. We re-hang swing gates on new posts with the right footings, replace hinges with sealed-bearing units, and set the stop hardware so the gate closes true.
Our Gate Installation team handles the full scope: posts, hinges, welds, gates, operators, keypads, and loops. One tradesman’s eye on the whole job.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Arlington
We service and install operators from nine major brands, which means we’re not married to any one manufacturer. If your Arlington gate has a LiftMaster operator, we know it. If it has a DoorKing or an Elite, we know those too. Mighty Mule on a farm-style gate, a Viking on a commercial slide, we work on all of them. That matters when the correct fix means matching a new operator to an old gate, or when the original control board is obsolete and needs a retrofit with current UL 325 safety compliance. We keep parts for the most common Arlington installations, and what we don’t stock, we can have in days, not weeks.
Common Gate Installation Problems We See in Arlington Homes
If you’re reading this as a homeowner in Arlington, one of these probably sounds familiar:
- Posts that won’t stay put. Standard-depth concrete footings on Blackland Prairie clay start leaning within a single dry summer. The swing gate drags on the latch side, binds, and stops closing without a shove. We reset posts with deeper frost-and-expansion footings and helical anchors, so the gate stays plumb through drought and rain.
- Obsolete control boards after ice storms. North Texas ice storms bring power surges, and old control boards on 20-plus-year-old operators fail after the first flicker. The gate is now stuck open or closed, and the board is no longer manufactured. We retrofit with modern UL 325-compliant controls, including monitored safety edges and photo eyes.
- Warped cedar on double gates. Weeks of hundred-degree heat bake the moisture out of cedar planks, and double driveway gates sag. The extra load lands on worn hinge posts. We replace warped cedar with kiln-dried stock or steel inserts, and re-hang the gate so it doesn’t pull the fresh post out of square.
- Community entrance gates with worn rack and pinion. In the HOA communities across south Arlington, shared slide gates run hundreds of cycles a day. If a hinge post has shifted even slightly, the rack and pinion wear unevenly and the operator strains. We replace the post, set it right, and remount the rack so the gate tracks straight.
None of these are one-time fixes on Arlington soil. The addresses show up on our service logs multiple times across five years because previous repairs didn’t address the ground. We do address the ground. That’s the part that matters.
The Blackland Prairie Problem: Why Gate Installation in Arlington Is Different
Here’s what you won’t see on a generic gate company’s website. Arlington sits atop the Blackland Prairie clay belt, and that clay is one of the most expansive soils in Texas. It swells when wet and shrinks when dry, and it does both dramatically. A gate post set in a standard 30-to-36-inch concrete footing will heave, lean, and go out of plumb year after year, not decade after decade. The result is a swing gate that drags, a sliding gate that binds, and a post that eventually cracks under the lateral load. Cities a few counties over, built on sandy or loam soil, don’t fight this. Arlington does.
That’s why we treat helical anchors and deep frost-and-expansion footings as standard practice in Arlington, not an upgrade. Not every lot needs both. Some 76001 properties on relatively stable micro-terrain can get by with a deeper footing. But most gates we install in 76002 and 76003 subdivisions require an anchor system to survive the dry-summer heave that defines this soil. If a contractor quotes you a gate without even asking about your soil, that’s a red flag. You’ll pay for that gate twice.
One example. In a late-1990s HOA community in 76002, we replaced an original LiftMaster slide gate operator on a community entrance. The rack and pinion had worn unevenly because the hinge post had shifted in the clay. So our crew set a new helical anchor footing, remounted the operator, and added a loop detector. The gate now tracks straight through a full open/close cycle without binding. That job wasn’t about the operator. It was about the ground the post stood in. That’s the part you don’t see until it fails.
Pricing for Gate Installation in Arlington, TX
Here are honest numbers for Arlington’s market, and what drives them.
| Gate Type | Typical Arlington Installed Price |
|---|---|
| Pedestrian gate, steel or cedar, single | $900-$2,200 |
| Single swing driveway gate, ornamental iron | $2,400-$4,800 |
| Double swing driveway gate, ornamental iron | $4,200-$8,500 |
| Sliding driveway gate, steel frame | $3,800-$7,200 |
| Automated operator, installed (LiftMaster, DoorKing, Elite) | $1,400-$3,600 |
What moves the price? Material and length, obviously. But in Arlington, site preparation is the variable nobody sees coming. If your existing posts have shifted and need to be dug out, new footings poured, and helical anchors driven, that’s real work and real material. A double swing gate on a clay lot in 76001 will cost more than the same gate on stable ground elsewhere. We’ll tell you that before we start. You’ll always get a written price, agreed up front, before any work begins. Free estimates, always. Call (903) 532-2236 and we’ll walk the site and give you a number.
We Also Serve Cities Near Arlington
If you’re in Mansfield, Grand Prairie, Cedar Hill, or Duncanville, the same clay and the same crew cover your area too. Our Gate Installation in Arlington team schedules across the metro, and the 90-Day Done Right Promise travels with every job. Same phone, same square deal.
Serving Arlington, TX - Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Arlington
Because the post was likely reset in a standard-depth concrete footing on Blackland Prairie clay, which swells and contracts so aggressively that a post can go out of plumb within one dry summer. The original installer didn’t go deep enough or use helical anchors, so the clay moved and the post moved with it. The fix is a deeper frost-and-expansion footing plus a helical anchor driven below the active clay layer. That’s the only way a post on this soil stays put. We can evaluate your current post and tell you honestly whether a reset will hold or whether a full re-footing is required. Call (903) 532-2236 and we’ll take a look.
Yes, in most cases. Older Arlington swing gate operators often predate UL 325’s monitored safety edge and photo eye requirements. If the operator itself is still sound, we can add the required monitored entrapment protection devices, replace the control board with a modern unit, and bring the setup into compliance. If the operator is beyond saving, we’ll tell you that too, and give you a price for a replacement that’s matched to your gate’s weight and swing path. Either way, the quote comes before any work starts.
If the warp is shallow and the frame is still sound, sometimes we can pull the planks, re-set them with larger gaps for thermal movement, and add a steel backing frame. But Arlington summers with weeks over 100°F warp cedar fast, and once the planks draw into a noticeable cup or bow, replacement is usually cheaper and longer-lasting. We’ll give you a straight answer based on the gate you have, and the price before we touch it.
A linear arm actuator or an articulated arm operator, sized to the gate’s weight, works best for a double swing gate on Arlington clay. The important part is not just the operator brand but the installation. The posts have to be set deep enough and anchored so the gate doesn’t shift and pull the operator out of alignment. We install LiftMaster, DoorKing, Elite, and several others, and we’ll recommend the right match for your gate rather than whatever’s in the warehouse.
Look at the wear pattern on the rack. If it’s worn evenly across its length, the rack and pinion are at end of life and should be replaced. If the wear is heavier on one end, or the gate visibly drifts or hops as it travels, the hinge post has likely shifted in the clay and is pulling the rack out of line. In Arlington, that post shift is the more common root cause. We’ll inspect both and tell you what actually needs work, not what’s easiest to replace. Call (903) 532-2236 for a straight inspection and a written estimate.
Call Ironworks Gate Co. for Gate Installation in Arlington
If your Arlington gate is leaning, sagging, or just plain old, call us. We’ll come out, look at the ground, look at the gate, and give you a written price before anything gets touched. No surprises on the bill. A live person answers 24/7 at (903) 532-2236. Victor Salinas and the Ironworks Gate Co. team do gate work, only gate work, and we stand behind it. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Arlington families and communities with gate installation, repair, and automation.