Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Dallas
Most gate repairs in Dallas fail within a year, and the culprit is usually the same: the black gumbo clay under your posts. It swells when it rains and shrinks when it doesn’t, and it moves everything sitting above it. That’s why hinge replacement, post replacement, and custom welding in Dallas have to be done differently than they are in Fort Worth or anywhere else with more forgiving soil. We’re Ironworks Gate Co., and we’ve been welding and rebuilding gates on this dirt for over 42 years. Call (903) 532-2236 for a free estimate, and we’ll send a technician who actually understands what Dallas clay does to a gate post.
Why Ironworks Gate Co. Is Dallas’s Preferred Gate Parts & Welding Company
We built our name in Dallas the slow way, one gate at a time. Homeowners in neighborhoods from Oak Cliff to Uptown call us because the last fix didn’t hold and they don’t want to pay for the same repair twice. Every job we complete carries the 90-Day Done Right Promise in writing. That means if something isn’t right, we come back and make it right. No paperwork, no argument, no exceptions. Victor Salinas leads our Dallas crew, and he holds every technician to the K.E.Y.S. standard: Krafted right, Every time, Your home first, Standing behind it.
We know what the clay does to a post in 75203. We know what a Dallas summer does to a slide gate track on a commercial property in 75202. And we show up with the right steel, the right welder, and the right plan for the soil we’re dealing with. A live person answers every call, 24 hours a day, 7 days a week. If your gate is sagging tonight, you’ll talk to a human tonight, not a voicemail.
Our Gate Parts & Welding Services in Dallas
Our Gate Parts & Welding team handles the full scope of structural gate work in Dallas. Here’s what we do most often:
Hinge Replacement
Dallas heat and clay movement are hard on hinges. A heavy ornamental gate from the 1960s can easily outweigh the original hinge capacity by 200 pounds, and once the post rotates even a few degrees, the hinge takes all the load on one side. We cut out the old hardware, weld in heavy-gauge barrel hinges rated for the actual gate weight, and align everything to swing true. In Dallas, that typically runs $280 to $460 depending on gate size and whether we need to build up the post with steel plate first.
Post Replacement
This is the fix that actually lasts. A post set 24 inches deep in Dallas clay will heave out of plumb within a single wet-dry cycle. We set new posts on deep footings, below the active clay layer, and we weld the hinge mounts on square so the gate hangs level for decades, not seasons. Post replacement on a standard 6-foot driveway gate in Dallas runs $450 to $800, and on a wide farm gate with a heavy operator it’s $800 to $1,400. The price is agreed before we start, and the 90-Day Done Right Promise applies to every post we set.
Rail Repair
Rust and accident damage are the usual suspects. A delivery truck clips a gate and the top rail kinks, or forty years of Dallas humidity eats through the bottom rail from the inside. We cut out the damaged section, weld in matching steel, and reinforce the joint so it’s stronger than the original. Rail repair on a typical Dallas driveway gate runs $220 to $420. If the gate is ornamental wrought iron, we match the scrollwork so the repair disappears into the original design.
Custom Welding
Sometimes the gate you have isn’t the gate you need. We custom-weld gate frames, extension sections for wider openings, reinforcement plates for sagging corners, and complete new gates built to your measurements. Dallas acreage entrances often need a 14- or 16-foot gate framed in 2-inch square steel with a mid-rail for livestock wire. Custom welding starts around $180 for a small repair and runs $600 to $2,500 for a full custom gate depending on size and steel gauge. Victor personally inspects every custom weld before it leaves the shop.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Dallas
If your gate has a motor, we likely know the board that runs it. Our technicians are trained and equipped on nine gate-automation brands, and for Dallas customers the ones we see most often are LiftMaster, Elite, and DoorKing. We keep common parts for these brands on the truck, which means many motor and limit-switch repairs in Dallas are done in a single visit. If you’ve got a Mighty Mule operator on an acreage gate in southern Dallas, we stock those parts too. Most jobs are completed the same day the technician arrives.
Common Gate Parts & Welding Problems We See in Dallas Homes
- Sagging swing gates from clay shrink-swell. The hinge post rotates outward as the ground dries, dropping the latch side by an inch or more. New hinges alone won’t fix it; the post has to be re-set and re-squared.
- Slide gate track binding in summer heat. Dallas routinely hits 100°F and above, and steel track expands. If the original installer didn’t leave expansion allowance in the rack and pinion alignment, the gate binds and stalls halfway open on hot afternoons.
- Solar opener battery banks dying in winter. On acreage entrances without mains power, we see solar systems sized for sunny summers and underperforming through cloudy winter weeks. The battery bank needs to be sized for Dallas’ worst month, not its best.
- Wrought-iron scrollwork rusting through at the welds. Older ornamental gates in neighborhoods like Oak Cliff were often welded with mild steel wire, and 40 years of humidity find the weak points. We cut out the rusted section and weld in matching steel, then seal the joint properly.
Pricing for Gate Parts & Welding in Dallas, TX
What you pay depends on what’s actually wrong, but here’s what we quote most often in Dallas. Hinge replacement runs $280 to $460. Post replacement runs $450 to $1,400 depending on footing depth and gate size. Rail repair runs $220 to $420, and custom welding starts around $180 and goes up based on the project. If your gate is sagging, binding, or off its track, call (903) 532-2236 and we’ll send a technician to give you a written price before any work begins. We also offer a free second opinion on any written estimate from another company, and $50 off any repair over $250. The quote we give you is the price you pay. No surprises on the bill.
We Also Serve Cities Near Dallas
Our crews work throughout the Dallas metro, and we regularly send technicians to Duncanville, Lancaster, Grand Prairie, and DeSoto for the same Gate Parts & Welding in Dallas work we do in the city itself. If you’re on the edge of Dallas or just outside the loop, call (903) 532-2236 and we’ll get you on the schedule.
Serving Dallas, TX - Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Dallas
The hinges aren’t the problem; the post is. In Oak Cliff, the black clay under your post shrinks during dry spells and the entire post rotates outward, carrying the gate with it. New hinges just move the failure point. The fix is to re-set the post on a deep footing, weld heavy-gauge hinge brackets onto a plumb post, and re-hang the gate so it clears the latch. In Oak Cliff’s older blocks, we regularly see gates hanging several inches lower on the latch side than when they were installed. That’s a leaning-column job, and it requires post work before any hinge hardware will hold. Call (903) 532-2236 and we’ll come measure it.
Yes, but the battery bank has to be sized for Dallas’ cloudy winter weeks, not just its sunny summers. We see solar openers fail prematurely on acreage entrances because the system was under-batteried for a week of overcast skies. A 14- or 16-foot farm gate needs a heavy-duty operator and enough battery capacity to cycle through several days without full sun. We spec solar systems based on Dallas weather data, and we’ll tell you honestly if mains power or a different battery configuration makes more sense for your gate. Call (903) 532-2236 for a free assessment.
Probably not. When Dallas hits 100°F and above, steel gate track expands, and if the original rack and pinion alignment didn’t account for thermal expansion, the gate binds as it heats up and works fine again after dark. The motor is often fine; the track work is the culprit. We re-align the rack with proper expansion allowance, and in severe cases we re-weld the track anchors so the system has room to move. A track realignment in Dallas runs $220 to $420. Call (903) 532-2236 and we’ll diagnose it on-site.
Yes. A 1,000-pound gate swinging under power can injure livestock, children, or a vehicle if it meets resistance and doesn’t stop. Photo-eyes and edge sensors are a safety requirement, not an upsell. On Dallas acreage entrances, we install safety photocells and edge sensors on every automatic gate we build or automate, and we’ll never bypass one because the gate is “way out in the country.” The 90-Day Done Right Promise covers every safety device we install. Call (903) 532-2236 to have your gate evaluated.
For a standard 6-foot driveway gate in Dallas, we set posts at least 36 inches deep, and for wide farm gates or heavy operators we go 42 to 48 inches and pour a concrete footing below the active clay layer. A post set 24 inches deep will heave and rotate within a single wet-dry cycle. The depth isn’t the only factor; the footing has to extend below the shrink-swell zone entirely. If your existing post is moving, call (903) 532-2236 and we’ll tell you what it’ll take to set it right for the next 40 years.
If your gate is sagging, binding, or coming loose at the welds anywhere in Dallas, call Ironworks Gate Co. at (903) 532-2236. We’ll send a uniformed, background-checked technician to your property, give you a written price before any work begins, and stand behind every weld, post, and hinge with the 90-Day Done Right Promise.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Dallas since 1984.