Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Midlothian
When a gate post leans or a hinge tears loose in Midlothian, you need a welder who understands why it failed, not just somebody who can stick metal back together. We repair, replace, and fabricate gate parts for homeowners across the 76065 ZIP, and we do it with a written 90-Day Done Right Promise on every job. If your swing gate is sagging on worn hinges or your slide gate sounds like it is grinding rocks, call (903) 532-2236 and a live person answers, day or night.
Why Ironworks Gate Co. Is Midlothian’s Preferred Gate Parts & Welding Company
We have spent 42 years working on gates, and a good portion of that time has been spent in Ellis County. Midlothian is different from Cedar Hill or Mansfield in one way that matters a lot to gate hardware: the cement plants. That fine gray dust settles on everything, and it works its way into hinges, rollers, and weld points faster than most homeowners realize. Our Gate Parts & Welding team budgets extra time on Midlothian calls to clean housings and grease fittings before putting a wrench to anything.
Our technicians are background-checked and uniformed. They work the way they would work in their own mother’s driveway. Victor Salinas, who runs our crews, has seen more twisted posts and dust-packed motors in Midlothian than he can count, and he trains every tech to treat these jobs as what they are: a soil and dust problem as much as a metal problem. We quote the price before we start, in writing, and we do not change it on the back end.
Our Gate Parts & Welding Services in Midlothian
Post Replacement
Midlothian sits on Ellis County black clay that swells with spring rain and cracks open in August. Gate posts set in that soil lean within a few seasons unless the footing is deep enough and backfilled correctly. We cut out failed posts, dig footings past the active clay zone, pack the base with aggregate for drainage, and set new steel or wood posts straight. A post replacement in Midlothian typically runs $900 to $2,400 depending on gate size and whether we are re-hanging an existing gate or setting posts for a new one.
Hinge Replacement
Old ornamental-iron gates in Midlothian often run on hinges that were undersized from the start. Add decades of cement dust packing into the pivot points and you get seized hinges, snapped mounting plates, and a gate leaf that drags the ground. We cut off the old hardware, weld on heavy-duty replacement hinges with greaseable bushings, and re-hang the gate so it swings clean. Custom hinge replacement generally runs $275 to $750 per pair, including fabrication and welding.
Rail Repair
Slide gates collect more Midlothian grit than swing gates because the rail sits low. Worn rack-and-pinion sections, flattened rollers, and bent rail from soil movement are all common. We straighten and weld rail sections where we can, and replace them outright when the metal is too far gone. A rail repair job in Midlothian usually runs $350 to $900. If the motor has been straining against a bad rail, we check it too, because a rail repair that ignores a cooked motor only lasts until the next overload.
Custom Welding
Not every gate problem is a standard part. Older ranch gates along the 76065 corridor have fatigued welds at rail-to-stile connections, and Midlothian’s soil movement flexes those joints every wet-dry cycle. Our welders do on-site fabrication and repair for gates that are obsolete, custom-built, or just old. We have welded cracked seams, rebuilt corners, and fabricated replacement pickets to match existing patterns. Custom welding work in Midlothian starts around $125 for minor repairs and scales with the size of the job; we price every weld before we strike an arc.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Midlothian
We are certified on nine major gate-automation brands, and for Midlothian homeowners the ones that matter most are the ones already on the driveway: LiftMaster, DoorKing, and Mighty Mule gear shows up constantly in the neighborhoods we serve. Because Midlothian’s cement dust accelerates wear on limit switches and circuit boards, we keep common replacement parts for these brands on the trucks. That means one visit instead of a diagnosis, a parts run, and a second appointment.
Common Gate Parts & Welding Problems We See in Midlothian Homes
- Cement dust packing into hinges and rollers. The alkaline dust from Midlothian’s plants grinds into every moving metal surface. Hinges seize, rollers flatten, and the gate starts fighting the operator until something lets go.
- Gate posts heaving and twisting in black clay. The Vertisol soils under Midlothian move dramatically with moisture. Posts set at standard depths tilt and rotate, pulling gates out of alignment and snapping hinge plates.
- Obsolete control boards on early-2000s gates. Midlothian’s building boom produced hundreds of automatic driveway gates with control boards and photo-eyes that are now twenty years old. Many do not meet current UL 325 entrapment standards, and replacement parts are often discontinued.
- Fatigued welds on working ranch gates. Older properties east of town still run farm-style gates built for livestock, not daily vehicle traffic. Years of soil movement and heavy use crack the original welded joints, and we fix or reinforce them before the gate drops.
Pricing for Gate Parts & Welding in Midlothian, TX
Here is what Midlothian homeowners can expect to pay. Hinge replacement runs $275 to $750 per pair. Post replacement runs $900 to $2,400 per post depending on gate size and digging conditions. Rail repair runs $350 to $900. Custom welding starts at $125 and goes up with the size of the job. These are Midlothian market prices; they reflect the extra labor of cleaning cement dust and addressing clay movement, which a generalist from elsewhere will not budget for. Every quote is written and agreed before we touch a tool. Call (903) 532-2236 for a free estimate. We also offer $50 off any repair over $250 and a free second opinion on any written estimate from another company.
We Also Serve Cities Near Midlothian
Our crews work all over southern Dallas and Ellis County. Beyond Midlothian, we regularly take gate parts and welding calls in Cedar Hill, Mansfield, Red Oak, and DeSoto. If your gate is down and you are anywhere in that radius, call (903) 532-2236 and we will get you on the schedule.
Serving Midlothian, TX - Our Local Coverage Area
We’re based in the Midlothian area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Midlothian
Yes, in most cases a leaning post can be cut out and replaced while the gate leaf is preserved. We remove the old footing, dig below the active clay zone, pack the base with aggregate, set a new steel post, and weld the existing hinges back on. The key is footing depth and drainage; a post reset in Midlothian clay done right should hold for decades. Call (903) 532-2236 and we will tell you after one look whether your gate can be re-hung on new posts.
Yes, and we plan for it. The fine alkaline dust settles on photo-eye lenses and works into limit switch housings, which causes false triggers and erratic travel. Our local crews clean these components as part of every Midlothian service call. We also recommend greaseable bushings and sealed components where available. If you are replacing an opener, ask us about dust-resistant installation practices that make more sense in Midlothian than they do ten miles north.
Most cracked seams can be welded, but the real question is whether the metal around the crack has thinned from rust and fatigue. We inspect the whole gate, not just the obvious break. If the surrounding material is still sound, we weld it, grind it clean, and often reinforce the joint with a gusset plate. If the gate is rusted through in multiple places, replacement may cost less than chasing failures. Either way, you get an honest answer and a written price before we start.
Early-2000s photo-eyes generally do not meet the current UL 325 standard, which has been updated multiple times since those systems were installed. The requirements for entrapment protection on automatic gates are stricter now, and older photo-eyes, edge sensors, and control boards often cannot provide the required protection. We evaluate legacy systems honestly and tell you what needs replacing and what can stay. Upgrading a safety system costs far less than an entrapment incident. Call (903) 532-2236 for a free safety inspection.
We dig below the active clay zone, typically 36 to 42 inches deep depending on the site, and backfill with packed crushed aggregate rather than native clay. That creates a drainage path and a stable base that resists the heave-and-shrink cycle. We also set posts in concrete with rebar reinforcement for heavier gates. A post set this way costs more than a shallow two-foot hole with sackrete, but it stays put. Estimates are free, so call (903) 532-2236 and we will walk you through the right approach for your gate.
Need gate parts or welding in Midlothian? Call (903) 532-2236 now. We answer 24/7, give free estimates, and back every job with the 90-Day Done Right Promise. Senior and veteran homeowners receive a permanent 5% discount.
Written by Victor Salinas, Owner at Ironworks Gate Co.