Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Dallas
A gate repair in Dallas usually runs between $180 and $640, with most homeowners paying around $275 to $385 for a hinge-and-post fix or a realignment on a swing gate. Electric opener repairs tend to land higher, typically $340 to $850 depending on the motor and board. Our techs serve every Dallas neighborhood from Oak Cliff to downtown, and we answer the phone live at (903) 532-2236 whenever you call.
We know what the black gumbo clay underneath this city does to a gate post. A gate that worked fine last spring can be dragging on the latch by August, not because the hinges failed, but because the ground beneath the post moved. That’s the repair most Dallas homeowners actually need, and it’s the one we’re built to do right. Ironworks Gate Co. has been in this trade for over 42 years, and our Gate Repair team has seen every way a Dallas gate can fail.
Why Ironworks Gate Co. Is Dallas’s Preferred Gate Repair Company
Dallas homeowners tend to keep their houses for decades. The gate that was hung in 1998 is still there, and when it starts sagging or the opener goes dead, the owner wants someone who will treat that gate the way they’d treat their own. That’s the customer we work for. We show up in a uniform, background-checked, and we don’t leave until the gate opens and closes the way it should. Every job carries our 90-Day Done Right Promise in writing, so if something isn’t right, we come back and make it right. No arguing, no paperwork.
We’re not a handyman with a truck. We’re a dedicated gate shop, and we’re trained and equipped on nine automation brands including LiftMaster, FAAC, and BFT. That means when a Dallas homeowner has a gate that won’t open after a hard freeze, we diagnose the actual failure rather than guessing and selling parts. A live person answers our phone 24 hours a day, seven days a week, so when your gate is stuck open at 6 a.m. and you have to get to work, you talk to a human who can dispatch a crew to your part of Dallas that same day.
Our owner, Victor Salinas, has built this company on a simple rule: the 400th job gets the same care as the first. Dallas customers who’ve had us reset a leaning column in Oak Cliff or replace a burned-out motor in Uptown tell their neighbors. That’s how we’ve stayed busy here for over four decades, and it’s why we plan to be here for another forty.
Our Gate Repair Services in Dallas
Gate Realignment
Realignment is the most common repair call we get in Dallas, and it’s almost always about the soil. The expansive clay under this city swells after spring rains and shrinks through the summer drought, working on gate posts like a slow jack. A gate that gets harder to latch every August isn’t wearing out; its post is rotating. Our crew checks the plumb line first, then we reset the post or re-shim the hinges so the gate clears evenly. We don’t just lift it and call it done.
Hinge & Post Repair
On older Dallas properties in 75203, the hinge post is often a brick column, and those columns move. The clay dries, the footing settles, and the column leans. We see gates hanging three inches low on the latch side, hinge screws stripped, and weld points fatigued. The fix starts at the footing. If the column needs masonry repair before new hinges will hold, we say so and do that work first through our Gate Parts & Welding in Dallas. In the Oak Cliff blocks we’ve worked, this is the difference between a gate that lasts ten years and one that fails again next spring.
Electric Gate Repair
Dallas heat is hard on gate motors. A plastic gear housing that would last five years in a milder climate can crack in three here, and the UV doesn’t help. We repair and replace motors, control boards, photo eyes, safety edges, and keypads through our Dallas Gate Motor & Opener services, and we stock common LiftMaster, FAAC, BFT, and Linear parts locally so most repair visits are one-and-done. If your opener is dead after a freeze, we check the gear train and battery backup path, because in Dallas that’s where the failure usually lives.
Automatic Gate Repair
An automatic gate that won’t open is a different problem than a gate that opens too slowly. We trace the full circuit, from the keypad or remote through the board to the motor and limit switches, as part of our Gate Access Control in Dallas diagnostics. Dallas has plenty of older automation still running that we support, and when the right fix is replacement rather than repair, we’ll tell you straight and quote the job before we start. No surprises on the bill.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Dallas
We’re trained and equipped to service nine major gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In practice, Dallas drives lift and slide gates, so LiftMaster and BFT are the units we see most often in downtown 75201 and 75202 garages, while FAAC and Linear show up regularly on residential estate gates in Oak Cliff and the older ranch streets around 75203. Because we service the brand rather than guessing at it, a Dallas customer doesn’t wait on a part shipped from out of state. Most jobs are completed in a single visit, and the price is settled upfront before we turn a single bolt.
Common Gate Repair Problems We See in Dallas Homes
- Leaning brick hinge columns. In Oak Cliff’s older blocks, the brick column holding a wrought-iron gate rotates outward as the black gumbo underneath dries and contracts. New hinges alone won’t fix it. The column has to be re-plumbed and re-footed first.
- Sliding gates that bind in the afternoon. On downtown Dallas commercial garages in 75201 and 75202, steel slide-gate tracks expand in 100°F heat and the gate stalls by mid-afternoon. The fix is usually an expansion joint or a track realignment, not a bigger motor.
- Openers dead after a hard freeze. Dallas has seen freeze events, including the 2021 Winter Storm Uri, that killed tens of thousands of gate openers city-wide. Cracks in plastic gear housings and a missing battery backup are the two most common causes we find.
- Wrought-iron sag on the latch side. In 75203, a swing gate often hangs low on the latch because the top rail has bowed and the post has shifted. We call it a sag correction, and it’s routine work for us in Dallas on mid-century ranch homes.
Pricing for Gate Repair in Dallas, TX
Here’s what you can expect to pay in Dallas for the most common gate repairs. A hinge and post repair on a residential swing gate typically runs $200 to $330. A full gate realignment, including post re-shimming and hinge adjustment, lands around $180 to $310. Electric gate repairs, like a new control board or a motor capacitor, range from $340 to $650, and a complete operator replacement on a single swing gate starts near $850 and climbs depending on the brand. Commercial slide gate work in downtown 75201 and 75202 is quoted on site because track length, gate weight, and power availability vary widely.
Every price is quoted and agreed before any work starts. You’ll know the number before we pick up a tool. We also offer a free second opinion on any written estimate, and a $50 credit applies to any repair over $250. Call (903) 532-2236 and we’ll give you a straight number.
We Also Serve Cities Near Dallas
Our crews work all over the Dallas-Fort Worth metro. Along with our full service area in Gate Repair in Dallas, we regularly run calls in Duncanville, Lancaster, Grand Prairie, and DeSoto. If you’re just outside the city line, give us a call and we’ll likely already have a truck near you. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, and crews serve Dallas locally.
Serving Dallas, TX - Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Dallas
The hinges look fine because they are fine. The problem is the black gumbo clay under your hinge post. It swells with spring rain and shrinks through summer drought, and over the years that cycle rotates the post outward, which drops the latch side of the gate. Replacing hinges won’t stop it. The post has to be re-plumbed at the footing. We do that work in Oak Cliff regularly, and we’re glad to assess your gate at (903) 532-2236.
It’s usually the track. Steel expands as Dallas summer temperatures climb past 100°F, and a slide gate track that was installed without adequate expansion joints will bind as the metal grows. The operator is often fine. We’ve corrected this on garages in 75201 and 75202 by recutting expansion joints and re-aligning the track. Call us and we’ll measure the track before we quote anything.
Your gate should have a working photo eye or contact edge that stops and reverses the gate if something is in its path. If your gate doesn’t reverse when tested, it’s not compliant, and it’s also a safety hazard. We test entrapment protection on every automatic gate repair in Dallas and can bring older systems up to current requirements. If you’re unsure, we’ll test it for you.
Yes, in nearly all cases. The fix is not to keep shimming the hinges every summer. The fix is to stabilize the post footinging, sometimes with helical piers, and re-plumb the column so it holds steady through wet and dry cycles. We’ve done this on mid-century ranch gates in 75203 where the column had rotated outward for decades. Once the footing is right, the gate clears in August and January alike.
Dallas gets hard freezes that Phoenix never sees, and those freeze events crack plastic gear housings and seize motors that were never winterized. The February 2021 storm is the best-known example, but even a routine Dallas cold snap will kill an opener that lacks battery backup and cold-weather prep. We install battery backup systems and winterize motors for Dallas homeowners who don’t want a dead gate every January. Call (903) 532-2236 for a quote.
If your gate is sagging, binding, or dead, call Ironworks Gate Co. at (903) 532-2236. Estimates are free, prices are settled before work begins, and every job carries our 90-Day Done Right Promise in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Dallas for over 42 years.